Micro T-1 was built to offer the same battle proven ruggedness as other Aimpoint products.  Suitable for use on rifles, carbines shotguns, submachine guns and handguns, the T-1 is ideal as a standalone sight and can also be "piggybacked" on top of larger magnifying scopes, night vision, or thermal imaging optics.  It can also be used by hunters and sport shooters that need night vision compatibility.  With 4 NVD-compatible brightness settings and 8 daylight settings including one extra bright setting it is ready for use around the clock.  It weighs 3.7 oz and is submersible to 80 ft.  ACET technology allows 50,000 hours of constant operation from one battery.  Compatible with all generations of Night Vision Devices. 4 MOA dot. Comes with a Lever Release Picatinny (LRP) Mount and a Micro Spacer High. Raises height of optical axis to 39 mm for co-witness with AR-15.

Includes micro tool, battery and rubber bikini lens cover.

Our Price: each $695.00

In Stock

This product from Aimpoint is designed to mount a micro sight to the top of the slide on Glock Pistols.  This item attaches to the microsight by removing the standard Picatinny / Weaver rail mount that is supplied on the sight.  To install the mount on the pistol, the rear sight must be removed.  The mount is then slid over the dovetail that is cut in the slide and the set screw on the mount is tightened against the slide to hold it in place.

Comes complete with mount, mounting screws, low strength loctite, Aimpoint torx head wrench and allen wrench.

Our Price: each $49.00

In Stock

This product from Aimpoint is designed to mount a microsight to a Ruger Mark III pistol.  This item attaches to the microsight by removing the standard Picatinny / Weaver rail mount that is supplied on the sight.  The mount attaches to the pistol utilizing the factory-drilled accessory holes on top of the firearm.

Comes complete with mount,  mounting screws, and Aimpoint torx head wrench.

Our Price: each $45.00

In Stock

This product from Aimpoint is designed to mount a microsight to a Ruger 10/22 rifle.  This item attaches to the microsight by removing the standard Picatinny / Weaver rail mount that is supplied on the sight.  The mount attaches to the rifle utilizing the factory-drilled accessory holes on top of the firearm.

Comes complete with mount, mounting screws and Aimpoint torx head wrench.

Our Price: each $45.00

In Stock

39 Millimeter Riser for the Aimpoint H-1 and T-1 Micro Red Dot Sight. Raises the optic for Co-Witness with iron sights on the AR15/M16 rifle.

Our Price: each $62.00

In Stock

The Comp M2, also known as the M68/CCO (when used by US Forces) is the standard sight for the U.S. Army and U.S. Air Force.  Due to its compatibility with all generations of Night Vision Devices, the Comp M2 is ready for use around the clock.  The Comp M2 holds up under the roughest physicalhandling and can withstand the most severe weather conditions and temperatures.  In fact, the Comp M2 is completely submersible and will withstand pressures up to 2,5 atmospheres allowing it to be taken up to 80 ft underwater.  CET technology allows up to 10,000 hours of daytime operationon one battery and 100,000 hours of use on NVD setting.  This sight has unlimited field of view and is parallax-free with unlimited eye relief.  4 Minute of Angle.  Night Vision Compatible.  ARMS 22M68 or American Defense mount are available at reduced price.  Optional full spacer or cantilever spacer available at reduced prices.

Our Price: each $497.00

In Stock

The Comp ML2 is every bit as durable as the Comp M2 and can withstand the roughest physical handling and extreme temperatures as well as weather conditions.  The CET technology allows up to 10,000 hours of operation on one battery.  The Comp ML2 is primarily designed for use in daylight and lowlight conditions for hunters and sport shooters who demand the best in the field.  The ML2 has unlimited field of view and is parallax-free with unlimited eye relief.  4 MOA dot.  ARMS 22M68 or American Defense mount available at reduced price.  Optional full spacer or cantilever spacer available at reduced prices.

Our Price: each $445.00

In Stock

The Comp ML2 is every bit as durable as the Comp M2 and can withstand the roughest physical handling and extreme temperatures as well as weather conditions.  The CET technology allows up to 10,000 hours of operation on one battery.  The Comp ML2 is primarily designed for use in daylight and lowlight conditions for hunters and sport shooters who demand the best in the field.  The ML2 has unlimited field of view and is parallax-free with unlimited eye relief.  Incudes Dark Earth Rubber Boot, flip-up lens caps and QRP Mount. 4 MOA dot.

Our Price: each $519.00

In Stock

The Comp M3 features Aimpoints latest technology and is even more rugged than Aimpoints other sights.  (ACET) Advanced Circuit Efficiency Technology which allows 50,000 hours of operation on one single battery and 500,000 hours of use on NVD setting.  Built primarily for armed forces and police use to hold up under the roughest physical handling and most severe weather conditions, the Comp M3 is also ideal for hunters and sport shooters. The M3 is submersible to 135 ft.  This scope has unlimited field of view and is parallax-free with unlimited eye relief. 2 MOA dot. Increased battery life.  Night Vision Compatible.  Includes black rubber armor boot.  ARMS 22M68 or American Defense  mount available at reduced price.  Optional full spacer or cantilever spacer available at reduced prices.

Our Price: each $562.00

In Stock

The Comp ML3 features (ACET) Advanced Circuit Efficiency Technology which allows 50,000 hours of operation on one battery.  This optic is primarily for use in daylight and in low light conditions for for law enforcement and military applications as well as professionals, hunters and sport shooters who don't need night vision compatibility but want an extremely tough and reliable sight.  Submersible to 135 ft of water. This optic has unlimited field of view and is parallax-free with unlimited eye relief.   2 MOA dot.  Increased battery life.  Includes black rubber armor boot.  ARMS 22M68 or American Defense mount available at reduced price.  Optional full spacer or cantilever spacer available at reduced prices.

Our Price: each $506.00

In Stock

The Aimpoint CompM4 is now the latest version of the US Army's M68 CCO( Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997. The CompM4 is the finest sight that Aimpoint has ever produced. Improvements include increased energy efficiency that provides over 8 years of continuous use from a single AA battery. Compatible with every generation of Night Vision Devices (NVD). 7 night vision compatible settings, 8 daylight settings, and one extra bright.  Improved rotary switch will not suffer damage under normal use. QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear. Mount base is "keyed" into the body of the sight to absorb recoil. Mount base screws directly into the sight. No separate sight ring is required.  Submersible to 150 feet.  2 MOA dot for close combat and long distance engagement.  Matches perfectly with Aimpoint 3X magnifer.  Comes with heavy duty bikini style rubber caps and Tenebrax KillFlash.  Vertical spacer included, along with improved adjustment caps. Standardized as the US Army's new M68 CCO. Can be used with a carry handle adaptor for use on all M16 rifles.

Our Price: each $759.00

In Stock

The recommended mount for the 3XMag is the Aimpoint Twist Mount, which allows for quick attachment and detachment.  The Aimpoint Twist Mount fits any MIL-Std 1913 Picatinny Rail.

Our Price: each $159.00

In Stock

The Kiser Munitions MultiMount is the solution for mounting your Aimpoint CompM4 and Aimpoint 3XMagnifier - one compact mounting solution retains both optics. The MultiMount design allows for quick attach and removal of the 3XMagnifier with dependable retention once the optic is in place. The US Army and the US Marines require an 'always on' solution for the 3XMagnifier that is durable enough to endure the wall-bashing rigors of combat. When other solutions have been known to bend or snap off the rifle, the Kiser Munitions MultiMount keeps on performing its function flawlessly. 7075 T6 aluminum with Type III hardcoat anodizing / screw-locking helical inserts / low-profile design / proper height for "lower third" cowitness / cantilever design for using Magnifier without changing your cheek-weld

Our Price: each $99.00

In Stock

Outer Rubber cover for the Aimpoint M2, ML2, M3 and ML3. BLACK in Color

Our Price: each $30.00

In Stock

Outer Rubber cover for the Aimpoint M2, ML2, M3 and ML3. TAN in Color 

Our Price: each $30.00

In Stock

Allows you to have aimed fire around corners without exposing yourself.  Very lightweight with fast attachment to your Aimpoint, can be rotated 180 degrees for fire around a corner to the left or right.  Does not impede standard forward use of Aimpoint, but with a quick adjustment, the user can look and aim around corners.   Limited supply.  This is an attachment FOR an Aimpoint, the Aimpoint is NOT INCLUDED.

Our Price: each $120.00

In Stock