Categories:    Free Float Tubes, New Products

Hogue OverMolded Free-Float Handguard - MID - BLACK

This Hogue Forend combines the advantages of a free-float tube with Hogue's proprietary rubber overmolding. Free- floating your AR barrel gives maximum accuracy by eliminating all hand guard forces on the barrel. The rubber OverMolding gives a super comfortable, non slip grasping area that insulates your hand from the heat produced during rapid fire. Rubber OverMolded Mid-Length aluminum tube. Available in BLACK

Categories:    Free Float Tubes, New Products

Hogue OverMolded Free-Float Handguard - RIFLE - BLACK

This Hogue Forend combines the advantages of a free-float tube with Hogue's proprietary rubber overmolding. Free- floating your AR barrel gives maximum accuracy by eliminating all hand guard forces on the barrel. The rubber OverMolding gives a super comfortable, non slip grasping area that insulates your hand from the heat produced during rapid fire. Rubber OverMolded Rifle Length aluminum tube. Available in BLACK

Categories:    Yankee Hill Machine, Free Float Tubes

YHM - 5002 TJ - Todd Jarrett Competition - CARBINE Forearm

These CARBINE forearms were designed in conjunction with acclaimed shooter Todd Jarrett and are adorned with his signature. They feature a grip area without rails for a more comfortable grip, unique diamond shaped heat vents, an extended top rail for gap-free installation, “T” marked rails to mark accessory locations, and they utilize our anti-rotation screws for secure installation. The carbine version mounts so that the front sight is surrounded by the forearm on 3 sides. The forearms and barrel nuts are made of 6061-T6 aluminum and hardcoated to military specifications. The jam nut and anti-rotation screws are steel and plated a matte black finish to match. Assemblies include: one jam nut, one barrel nut, two anti-rotation screws, and one forearm tube.

Extended top rail to go up against your Flat Top receiver for an uninterupted rail.

The Carbine Forearm measures 9 1/4 inches in length.

Categories:    Yankee Hill Machine, Free Float Tubes

YHM - 5007 TJ - Todd Jarrett Competition - MIDLENGTH Forearm

These Midlength forearms were designed in conjunction with acclaimed shooter Todd Jarrett and are adorned with his signature. They feature a grip area without rails for a more comfortable grip, unique diamond shaped heat vents, an extended top rail for gap-free installation, “T” marked rails to mark accessory locations, and they utilize our anti-rotation screws for secure installation. The forearms and barrel nuts are made of 6061-T6 aluminum and hardcoated to military specifications. The jam nut and anti-rotation screws are steel and plated a matte black finish to match. Assemblies include: one jam nut, one barrel nut, two anti-rotation screws, and one forearm tube.

The Midlength Forearm measures 9 1/4 inches in length.

Categories:    Yankee Hill Machine, Free Float Tubes, New Products

YHM - 5009 TJ - Todd Jarrett Competition - 15 Inch Forearm

These fifteen inch forearms were designed in conjunction with acclaimed shooter Todd Jarrett. They feature a grip area without rails for a more comfortable grip, unique diamond shaped heat vents, an extended top rail for gap-free installation, “T” marked rails to mark accessory locations, and they utilize our anti-rotation screws for secure installation. The forearms and barrel nuts are made of 6061-T6 aluminum and hardcoated to military specifications. The jam nut and anti-rotation screws are steel and plated a matte black finish to match. Assemblies include: one jam nut, one barrel nut, two anti-rotation screws, and one forearm tube.

Categories:    Free Float Tubes, Yankee Hill Machine

YHM 5000 - Smooth Forearm - Carbine

This free floating forearm features a smooth design for a more comfortable grip while incorporating a full length top rail. The forearm also features three 2.5" rails that extend beyond the front sight to allow the mounting of lights, lasers, and other accessories. This forearm uses anti-rotation screws to ensure the forearm stays solid, even under severe use.

Categories:    Free Float Tubes, Yankee Hill Machine

YHM 5004 - Smooth Forearm - MID Length

This free floating forearm features a smooth design for a more comfortable grip while incorporating a full length top rail. The forearm also features three 2.5" rails at the end of the forearm to allow the mounting of lights, lasers, and other accessories. This forearm accepts YHM end caps and uses anti-rotation screws to ensure the forearm stays solid, even under severe use.

Includes Barrel Nut and Lock Ring.

Categories:    Yankee Hill Machine, Free Float Tubes

YHM 5005 - Smooth Forearm - Rifle

This free floating forearm features a smooth design for a more comfortable grip while incorporating a full length top rail. The forearm also features three 2.5" rails at the end of the forearm to allow the mounting of lights, lasers, and other accessories. This forearm accepts YHM end caps and uses anti-rotation screws to ensure the forearm stays solid, even under severe use.

Includes Barrel Nut and Lock Ring.

Categories:    Yankee Hill Machine, Free Float Tubes

YHM-9432A Customizable Free Float Tube - Rifle

Features slotted heat vents, accept YHM sling studs and forearm end caps. Drilled and tapped at the 3, 6, 9, and 12 o'clock postions for add-on rails.  Made of aluminum alloy. Front sight must be removed for installation.

Includes Barrel Nut and Lock Ring.

 Includes two add-on rails in 12 inch length and 3 inch length.

Category:    Free Float Tubes

Rock River Arms - ADVANCED - Half Quad Midlength Free Float Forearm

Rock River Arms NEW half quad aluminum free-float tube. This ADVANCE free float handguard, for mid-length gas system has a continuous top rail,  sides and bottem are half railed. Milled slots in the front and holes in the rear balance the weight distribution and aid in heat elimination. The sides are checkered giving you a positive, no slip, grasp on the forearm.

Fits the 5.56/223 caliber Firearms.

Includes Barrel Nut and Lock Ring.

Category:    Free Float Tubes

Rock River Arms Advanced Half Quad RIFLE LENGTH with Full Length Top Rail

Rock River Arms NEW advanced half quad aluminum free-float tube. This ADVANCE free float handguard, for rifle-length gas system has a continuous top rail,  sides and bottem are half railed. Milled slots in the front and holes in the rear balance the weight distribution and aid in heat elimination. The sides are checkered giving you a positive, no slip, grasp on the forend.

Fits the 5.56/223 caliber Firearms.

Includes Barrel Nut and Lock Ring.

Category:    Free Float Tubes

Rock River Arms CAR Wraparound Quad Rail

Aluminum free float quad rail handguard with extended rails on each side that wraparound the front sight base for extended mounting of lights and lasers. For CARBINE length gas system.

Includes three (3) ladder rail covers, seven slot and all hardware.

Category:    Free Float Tubes

Rock River Arms MID Wraparound Quad Rail

Aluminum free float quad rail handguard with extended rails on each side that wraparound the front sight base for extended mounting of lights and lasers. For MID length gas system.

Includes three (3) ladder rail covers, seven slot and all hardware.

Category:    Free Float Tubes

Rock River Arms Free Float Tube - Pistol

Rock River Arms 4" Pistol forend - two piece design.

Front sight must be removed for installation.

 

Category:    Free Float Tubes

Rock River Arms Free Float Tube - Carbine

Front sight must be removed for installation. One piece design.

Category:    Free Float Tubes

Rock River Arms Free Float Tube - Midlength

Front sight must be removed for installation.

Includes barrel nut and lock ring.

Category:    Free Float Tubes

Rock River Arms Free Float Tube - Rifle

Front sight must be removed for installation. Three piece design with barrel nut, tube and lock ring.

 

Category:    Free Float Tubes

Free Float Tube - Pistol

Front sight must be removed for installation.

Two Piece design.

Category:    Free Float Tubes

Two Piece Free Float Tube - Carbine - Vented

Front sight must be removed for installation.  Vented for cooling.

Includes Barrel Nut and Vented Tube.

Category:    Free Float Tubes

Two Piece Free Float Tube - Rifle - Vented

Front sight must be removed for installation.  Vented for cooling.

Includes Barrel Nut and Vented Tube.

Category:    Free Float Tubes

Badger Ordnance TACTICAL Handguard - Rifle

 Ergonomic Beavertail (Trapezoidal) profile and wide flat bottom makes it a natural for Tactical or sport shooting. The TACTICAL version has a continuous TOP rail and 3 removable 2.5” long M1913 rail sections that can be positioned along the sides and bottom allowing the shooter the ability to customize the foreend to their unique requirements. The handguard is specifically designed to provide a “Stabilized” platform for shooting unlike a round handguard tube. The Stabilizer features Draganov style cooling slots along its length. Front sight must be removed for installation. Includes proprietary barrel nut.

 

 

Categories:    Sling Attachments and Adapters, Bipod Adaptors & Accessories, Free Float Tubes

Bipod & Sling Swivel Stud For Free Float Tubes