Categories:    GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1240 - ACOG Accucam With Lens Covers

Without a doubt the ACOG 4X32 series scopes are some of the most rugged and dependable scopes available. However, we think it is missing a very important component--lens covers.

The package includes the GG&G compact ACOG Mount with integral front lens cover adapter, the rear lens cover adapter, and a set of custom Buttler Creek lens covers that provide weatherproof, dust proof and moisture proof protection for the ACOG lenses. The 1240 model fits the TAO1, TA01B, TA01LAW, TA31, TA31A, TA31F and TA31RCO.

The Accucam ACOG Quick Detach Mount provides you with a solid method to quickly install or remove the scope from the weapon. The scope can quickly be installed on a dovetail rail in seconds by rotating the Accucam Lever to the locked position and can just as quickly be removed by rotating the Accucam Cam Lever to the unlocked position. Unlike other QD lever systems, it is fully adjustable to fit Weaver and MIL-STD-1913 dovetails, even those that are worn or out-of-spec. The ergonomic finger loop of the lever is easily operated, even with a gloved hand, and the round design is virtually snag-proof. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec.

Categories:    GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1241 - ACOG Accucam With Lens Covers

Without a doubt the ACOG 4X32 series scopes are some of the most rugged and dependable scopes available. However, we think it is missing a very important component--lens covers.

The package includes the GG&G compact ACOG Mount with integral front lens cover adapter, the rear lens cover adapter, and a set of custom Buttler Creek lens covers that provide weatherproof, dust proof and moisture proof protection for the ACOG lenses. The 1241 model fits the TA01NSN, TA01ECOS, TA01NSN-DOC, TA31DOC, TA31ECOS and TA31TRD.

The Accucam ACOG Quick Detach Mount provides you with a solid method to quickly install or remove the scope from the weapon. The scope can quickly be installed on a dovetail rail in seconds by rotating the Accucam Lever to the locked position and can just as quickly be removed by rotating the Accucam Cam Lever to the unlocked position. Unlike other QD lever systems, it is fully adjustable to fit Weaver and MIL-STD-1913 dovetails, even those that are worn or out-of-spec. The ergonomic finger loop of the lever is easily operated, even with a gloved hand, and the round design is virtually snag-proof. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec.

Categories:    GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1247 - Accucam Quick Detach Aimpoint COMP M4 Cantilever Mounting Base

The Aimpoint CompM4 Accucam QD Cantilever Mounting Base provides you with two inches of additional eye relief, while also providing space behind the CompM4 for an Aimpoint 3X Magnifier or PVS-14 Monocular. Tactical flexibility is highly valued in urban combat, and the New Aimpoint CompM4 QD Mount fills that need. This New Base allows the end user to quickly switch between optics and still maintain "on target" repeatability. The Aimpoint CompM4 base is a rugged optic; however, if by chance it should fail, the end user can choose between quickly deploying the weapons back-up iron sight and sighting through the CompM4, or quickly remove the scope and deploy the back-up iron sight. By using the Aimpoint CompM4 Cantilever Ring Mounting Base, the optic can quickly be installed on a dovetail rail by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. The unique cam design is fully adjustable to fit both Weaver and MIL-STD-1913 dovetails, and allows you to adjust the tension to accommodate out-of-spec or worn dovetails. Not recommended for .50 BMG or lightweight machine guns. In tests, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The unique finger loop design is easily operated, even with a gloved hand, and the rounded design is ergonomic and virtually snag-proof. The New GG&G Aimpoint CompM4 Mount is manufactured from solid billet 6061 T6 aluminum alloy and Type III hard-coat anodized matte black to meet mil-spec. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black to mil-spec.

Categories:    GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1237 Aimpoint T-1 Quick Detach Mount

Accucam Quick Detach T-1 Mount that includes a built in provision that provides for the installation of a flip up lens cover for the occular end. In addition to the occular lens cover being included, the kit also includes a specially prepared flip-up lens cover that fits the objective lens. The Aimpoint T-1 easily and solidly installs onto the lightweight GG&G Accucam QD mount with four 3mm screws. The installation wrench is included in the kit. The occular end of the T-1 scope fits perfectly into the small integral lens cover flange, and while providing the means to mount a flip-up lens cover, it does not interfere with the field of view. The T-1 mount is manufactured from solid billet 6061 T6 aluminum and is Type III hard coat anodized matte black per mil-spec. The New GG&G Aimpoint T-1 QD Mount is manufactured to mount directly to the AR15/M16 integral rail. This will position the red dot just above the front sight post, yet is low enough to co-witness with the GG&G MAD, A2 or Spring Actuated A2 BUIS.

Aimpoint T-1 not included.

Categories:    GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1408 - Aimpoint T-1/H-1 Bolt On Mount w/ Integral Lens Covers

Aimpoint T-1/H-1 Bolt On Mount w/ Integral Lens Covers has an ergonomic design. Aimpoint T-1 and H-1 mount provide a solid bolt on squeeze rail mounting system with a single recessed side bar and recessed socket head cap screw. The Aimpoint mount includes a custom prepared lens cover for the objective lens and an integral lens cover for the ocular end of the scope. The Aimpoint T-1/H-1 scopes easily install onto the T-1 mount and the H-1 mount with for 3mm screws. The installation wrench is included. Designed to mount directly to the AR-15/M16 upper receiver's dovetail. This location places the red dot just above the front sight post. The Aimpoint T-1 mount is low enough to allow co-witnessing with sights. The T-1/H-1 Mount w/ lens covers is manufactured from solid billet 6061 T-6 aluminum. All aluminum parts are Type III hard coat anodized matte black per mil-spec.

Categories:    GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1190 - Accu-Cam For Eotech

Categories:    GG&G Optic Mounts, EOTech, GG&G Optics Mounts and Accessories

GG&G 1269 EOTech Accucam For XPS

The Accucam QD Mounting System is still the only QD Lever System available today that does not add height to the EOTech optic. That’s because this unique and innovative quick detach system retrofits directly to the body of the XPS. The Accucam QD Locking Lever System For The XPS replaces the EOTech socket head screw or thumbnut attachment method. No other modifications are required. The Accucam system installs in approximately ten minutes. The only tools required are a 7/64" allen wrench and a torx head wrench which are both included in the kit. Weighing only two ounces, it is fully adjustable to fit Weaver and MIL-STD-1913 dovetails, even those that are worn or out of spec. Not recommended for .50 BMG or lightweight machine guns.

 

Categories:    Other Optic Accessories, GG&G Optics Mounts and Accessories

GG&G 1234 - Eotech Battery Latch - N Model

The GG&G Quick Action Batt Latch allows the battery compartment to be easily accessed. The ergonomic curve allows for the tip of your finger to easily pull up on the latch and release the tension. Even a gloved hand can now get the latch open. For the Eotech 511 and 551 N battery models.

Categories:    EOTech, Other Optic Accessories, GG&G Optics Mounts and Accessories

GG&G 1272 FTE EoTech XPS Lens Covers

FTE - Front Toward Enemy. The Lens Covers For The XPS fit between the EOTech hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens cover will fold back so that it is not damaged. Because of the contours of the EOTech housing, these covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses. These unique lens covers can be easily operated with either hand to provide flexibility of operation. The design and methodology is so unique that we were awarded a patent.

Categories:    Other Optic Accessories, EOTech, GG&G Optics Mounts and Accessories

GG&G 1275 FTE - Lens Cover For EOTech

FTE - Front Toward Enemy - lens cover for EOTech Holosights. These fit 511, 512, 551 and 552 models of EOTech sights. Features spring operated covers to help keep them out of the way.  The rear cover lays across the top, so as not to interfere with tyhe feild of view. Front cover acts as a sunshade.  Because of the contours of the housing the lens covers are not 100% waterproof.

Categories:    GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1236 Accucam Quick Detach Scout Base

The GG&G 1236 with Accucam mounting system was developed to accommodate long-eye-relief "scout"-type scopes and also Aimpoint red dot sights with night vision mounted to their rear. Manufactured from billet 6061 T6 aluminum alloy, black Type III hard-coat anodized per Mil-Spec, all of the GG&G mounting rails meet MIL-STD-1913.

Categories:    Other Optic Accessories, GG&G Optic Mounts, GG&G Optics Mounts and Accessories

GG&G 1392 Ring Reducers - 30mm to 1 inch

1 inch reducer manufactured from solid Delrin. A rugged, non-marring, quality machined 1 inch ring insert for all GGG Rings and Mounts. The one inch insert has a recoil flange on one side that keeps the reducer in the correct position during installation and recoil.

Category:    GG&G Optics Mounts and Accessories

GGG 1423 FTE - Hood and Lens Cover for Eotech EXPS 3-0, 3-2, and 3-4

The GG&G 1423 FTE (Front Toward Enemy) Hood and Lens Cover Combo for the Eotech EXPS is easy to install.  You only have to remove the EOTech hood and install the new GG&G hood and lens cover module.  The GG&G hood is Type III hard anodized matte black to mil-spec and matches the original Eotech finish.  All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.

The lens covers in the Eotech Hood and Lens Cover Combo Package provide the same great features as the originals.  They are spring operated so that once pressure is applied to release them from the closed position, they spring open.  The rear cover lies across the top, so as not to interfere with the field of view.  The front cover opens and serves as a sun shield.  However, if heavy brush, etc. is encountered, the front lens will fold back so that it is not damaged.  Because of the contours of the Eotech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.  These unique lens covers for scopes can be easily operated with either hand to provide flexibility of operation.

The GG&G Eotech EXPS Hood And Lens Cover Combo will fit Eotech models EXPS3-0, EXPS3-2 and EXPS3-4.