Rock River Arms National Match 2 Stage Trigger -

Our Price: each $109.00

In Stock

Timney Drop-In single stage Match Trigger with with Solid trigger. For Standard .154 Pin Receiver. 3 pound trigger pull.

Options availible for KNS non-rotating pins at reduced pricing.

Our Price: each $190.00

In Stock

3 Pound Pull Timney Trigger With Rock River Arms Lower Reveiver Kit

Our Price: each $239.95

In Stock

The Geissele Service Trigger Pull Weights:

First Stage: 3.2 - 5 pounds (4 pound nominal) Second Stage: 0.5 to 1.5 pounds

The Geissele Hi-Speed Service Rifle Trigger is designed for NRA High Power Service Rifle competition. It is an approved trigger for use in CMP sanctioned competitions such as National Trophy, NTIT and all Excellence In Competition matches. The Geissele Service Trigger includes all the Geissele standard features: . Lightning fast lock time . Separate sear adjustment for a sharp 2nd stage . Independent 2nd stage weight adjustment . Overtravel adjustment . Wire EDM cut sear surfaces for a smooth, precise pull.

Service Rifle competitions require military based weapons that meet certain criteria, one of which is a minimum trigger pull of 4.5 lbs. Our Service Rifle Trigger includes our exclusive 5-Coil trigger spring which will give a nominal 4 lb 1st stage. The Service trigger pull weights are biased with most of the pull weight on the 1st stage; this will allow a light second stage with an icicle sharp break, effectively giving your weapon a match grade trigger let off.

.154 Diameter Pins

These do work in .308s!

Our Price: each $279.00

In Stock

The Geissele DMR Rifle Trigger Pull Weights:

First Stage: 2.5 - 3.6 pounds (3 pounds nominal)  Second Stage: 0.5 to 1.5 pounds

The Geissele Hi-Speed Designated Marksman Rifle Trigger is designed for tactical and military shooting where trigger pull weight is not regulated. The Geissele DMR Trigger includes all the Geissele standard features: . Lightning fast lock time . Separate sear adjustment for a sharp 2nd stage . Independent 2nd stage weight adjustment . Overtravel adjustment . Wire EDM cut sear surfaces for a smooth, precise pull .

The Geissele DMR trigger combines the light 1st stage of the Match trigger with the more robust 2nd stage weight of our Service trigger. Perfect for all precision tactical shooting and squad Designated Marksmen, the higher 2nd stage weight helps in high stress shooting situations. Although the Geissele DMR trigger is not select fire the smooth pull allows an experienced shooter to fire at a rate exceeding 400 RPM which will empty a 30 round M16 magazine in 4.5 seconds. The Geissele DMR trigger also works great for 3 Gun matches, hunting and general target shooting.

.154 Diameter Pins

These do work in .308s!

Our Price: each $279.00

In Stock

The Geissele Match Trigger Pull Weights:

First Stage: 1.5 - 2.5 pounds (2 pound nominal)  Second Stage: 6 to 14 ounces

The Geissele Hi-Speed Match Rifle Trigger is designed for NRA High Power Rifle competition with highly modified AR15 Spaceguns. The Geissele Match Trigger includes all the Geissele standard features:

Lightning fast lock time, Separate sear adjustment for a sharp 2nd stage,  Independent 2nd stage weight adjustment , Overtravel adjustment  and Wire EDM cut sear surfaces for a smooth, precise pull.

AR15 Spaceguns are the Formula 1 weapons of High Power Rifle competition.  With very few restrictions, these highly customized semi-automatic weapons are intended to produce extreme accuracy at long range.  The Geissele Match trigger is a perfect Spacegun add on as the pull weight can be adjusted to low levels that enhance trigger control.  The fast lock time assists the shooter in getting every ounce of accuracy out of his weapon.  The Hi-Speed hammer also imparts more kinetic energy into the firing pin which produces much more consistent primer ignition especially with experimental cartridges or AR10 based weapons.

.154 Diameter Pins

These do work in .308s!

Our Price: each $279.00

In Stock

The Geissele Super 3 Gun (S3G) trigger is a semi-automatic derivative of the two-stage Super Select-Fire (SSF) combat trigger that Geissele Automatics has developed for customers in the U.S. Special Operations Community.

The new Geissele Super 3 Gun trigger has a super short trigger pull and a short reset so that rounds can be sent downrange as quickly as possible while still maintaining superb accuracy. The SSF's long, smooth pull was shortened and combined with a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while at the same time retaining the safety and robustness of the SSF's two-stage trigger design.

The result is a superb,  well-balanced trigger that is ideal for high-volume, accurate fire. An S3G-equipped rifle enables the shooter to engage targets faster and more accurately than with any other trigger/rifle combination available today. In fact,   field tests have shown that expert S3G shooters can routinely and accurately deliver up to twelve shots on an IDPA target at 7 yards in an amazing 1.6 - 1.9 seconds.

A description of the Super 3 Gun  trigger pull:

 1. The shooter starts pulling the trigger as his sights become aligned on target.

 2. At about 3.5 lbs., the trigger starts to move back smoothly, like it's on ball bearings.

 3. After the trigger moves a short distance, the weapon discharges. Nothing precedes the discharge:  no second stage stop, no grittiness, no stacking of the trigger pull weight as the hammer is cammed down like on a stock AR15 trigger. The trigger finger feels a sensation of walking along a perfectly flat, glassy-smooth plateau that suddenly drops away.

 4. After a short overtravel, the trigger is quickly reset when the shooter slightly relaxes his trigger finger and the next shot is ready to be fired without having to go back to the beginning of the trigger pull cycle.

Our Price: each $240.00

In Stock

The Geissele Super Semi-Automatic Enhanced (SSA-E) Trigger is a finely-tuned semi-automatic-only version of our full-auto, two stage combat trigger presently used in the U.S. Special Operations Community. Built on the chassis of the Geissele SSA, the SSA-E provides enhanced trigger control and weapon accuracy while maintaing the robustness and reliability of our combat-proven two-stage trigger. The SSA-E's reduced 1st and 2nd stage pull weights result in a trigger with a smooth, light 1st stage take-up and a crisp, candy cane-like 2nd stage break. The SSA-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.

The Geissele SSA-E has a pull weight of about 3.5 lbs. There is 2.3 lbs. on the 1st stage and 1.2 lbs. on the 2nd stage. The pull weights and sear engagement are non adjustable by the shooter.

.154 Diameter Pins

Our Price: each $210.00

In Stock

Two-stage combat trigger originally designed for U.S. SOCOM has a fixed 4½ lb. total pull weight, non-adjustable sear engagement. To prevent unintended discharge, a secondary “safety sear” captures the hammer if the primary sear accidentally releases due to hard impact on the weapon, ensuring the rifle can fire only when the shooter actually pulls the trigger. The trigger pull is optimized for both deliberate, aimed fire and quick, “snap” shooting. The first stage builds gradually to 2½ lbs., with a 2 lb. second stage, for smooth trigger operation that helps the shooter keep the sights on the target throughout the pull. A lightweight hammer driven by a full-power hammer spring ensures exceptionally fast locktime and positive ignition of all types of ammo. All contact surfaces are wire-EDM cut to exact dimensions for full, precise engagement free of unwanted play. Direct replacement for factory trigger; may be installed without removing the safety. All springs are captive to simplify maintenance and field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154" (small pin) mil-spec receiver holes to enable installation with basic tools. Super Select-Fire (SSF) fits full-auto M16/M4. Steel, black finish. Fits AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.

ALL NFA RULES APPLY

Our Price: each $300.00

In Stock

Great for reduction in trigger pull and enhanced reliability in Ciener 22 conversion kits.

Our Price: each $9.00

In Stock

The Timney AR-10 trigger is a self-contained, 100% drop-in unit ready to install in an AR-10 rifle for an exceptionally smooth, crisp, single-stage trigger pull. No gunsmithing, fitting, or adjusting required. Pull weight is factory set at 4 pounds. Lightweight, 6061 T6 alloy housing is anodized for superior durability. Hammer is EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Finally, a Teflon Nickel coating is applied to the hammer to deliver a super smooth trigger pull with superior lubricity. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for longer service life. Trigger Module installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin rotation and walkout.

Our Price: each $219.00

In Stock

The ALG Defense ALG Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however the majority of the associated grittiness of the stock trigger pull has been removed while the well known reliability of a stock trigger remains. The pull weight is above the U.S. Military minimun pull weight of 5.5lbs but does not reach near the upper limit of 9.5lbs. Generally, the pull weight is about 6.0lbs. The ACT trigger pull is smoother and sharper than a stock trigger. This is accomplished by polishing the sear surfaces smooth and HardLubing the trigger ccomponets. Trigger and hammer are made from true 8620 alloy steel military specification castings, correctly carburized, quenched and tempered for high surface hardness. Disconnector is 1070 high carbon steel. Springs are corrosion resistant and meet military specifications. Trigger and hammer pins are improved over stock mild steel by using 4140 chrome-moly steel that has been quenched and tempered. Both pins are Nickel-Teflon coated.

Our Price: each $65.00

In Stock

The ALG Quality Mil-Spec (QMS) Trigger is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the QMS is very similar to a standard mil-spec trigger, however the majority of the associated grittiness of the stock trigger pull has been removed while the well known reliability of a stock trigger remains. The pull weight is above the U.S. Military minimun pull weight of 5.5lbs but does not reach near the upper limit of 9.5lbs. Generally, the pull weight is about 6.5lbs. The QMS trigger pull is smoother than a stock trigger. This is accomplished by honing the sear surfaces smooth while not removing metal below the valleys of the stock surface finish. Trigger and hammer are made from true 8620 alloy steel military specification castings, correctly carburized, quenched and tempered for high surface hardness. Disconnector is 1070 high carbon steel. Springs are corrosion resistant and meet military specifications. Trigger and hammer pins are improved over stock mild steel by using 4140 chrome-moly steel that has been quenched and tempered.

Our Price: each $45.00

In Stock