02-151-12033_v11_pro_r_1_small
Click for Larger Image
Categories:    Daniel Defense Rifles, New Products, Specials
Daniel Defense M4 Carbine v11 PRO Series Rifle

The DDM4v11 Pro Series was designed for competitors looking for the platform to dominate podiums in today’s popular multi-gun matches.  Built around our newest 1 inch Strength to Weight, Cold Hammer Forged barrel, this platform delivers the speed, controllability, and precision required to engage the course designer’s most difficult stages.  The V11 Pro Series carries the new SLiM Rail™ 15.0 which offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense.  An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.  The long, 15 inch rail gives operators the option to have the support hand extended out closer to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets.  Competitors will also appreciate the larger latch provided by a Vltor Gunfighter Mod 4 Charging Handle for easier manipulation under magnified optics.  A newly designed Muzzle Climb Mitigator redirects propellant gasses through calibrated ports, countering both recoil and muzzle climb.  A Geissele Automatics Super Dynamic 3 Gun Trigger delivers rapid hits on target with its light, short pull and quick reset.  Combined with the softened recoil impulse of a rifle length gas system, equals shorter split times, more precise follow-up shots, and reduced fatigue. 

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
TRIGGER: Geissele Automatics Super Dynamic 3 Gun Trigger
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 18″ S2W Profile, and Salt Bath Nitride Finished
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
HANDGUARD: Daniel Defense SLiM Rail™ 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding

Comes complete with plastic storage case, owners manual, extra buttpad, and (1) 30rd PMAG.

Copy of FFL required for purchase.

No sales to California.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each Was $1,757.00
On Sale For $1,649.00
In Stock
Add_to_cart
300cara415_small
Click for Larger Image
Categories:    Rock River Arms Rifles, New Products
Rock River Arms LAR 300 - CAR A4 Rifle - .300 Blackout

The Rock River Arms LAR 300 - CAR A4 Rifle features a Rock River Arms 16 Inch CMV, HBAR profile barrel, chambered in 300 Blackout, with a 1:8 twist, carbine length gas system, A2 front sight base with sling swivel and bayonet lug and a 5/8-24 threaded muzzle.  Also features a forged A4 flat top upper receiver, forged LAR-15 lower receiver, RRA two stage trigger, RRA 6-position tactical CAR stock, RRA overmolded A2 pistol grip, carbine length plastic handguards, and an A2 flash hider. 

Comes complete with plastic storage case, owner's manual, and (1) 30rd magazine.

Copy of FFL required for purchase.

No sales to California.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $1,019.00
In Stock
Add_to_cart
Rra_300_blackout_car_a4_rifle_small
Click for Larger Image
Categories:    Rock River Arms Rifles, New Products
Rock River Arms - LAR-300 - CAR A4 - SINGLE RAIL GAS BLOCK Rifle - .300 Blackout

The Rock River Arms LAR 300 - CAR A4 - SINGLE RAIL GAS BLOCK - Rifle features a Rock River Arms 16 Inch CMV, HBAR profile barrel, chambered in 300 Blackout, with a 1:8 twist, carbine length gas system, and a 5/8-24 threaded muzzle.  Also features a forged A4 flat top upper receiver, forged LAR-15 lower receiver, RRA two stage trigger, RRA 6-position tactical CAR stock, RRA overmolded A2 pistol grip, carbine length plastic handguards, single rail gas block with sling swivel, and an A2 flash hider. 

Comes complete with plastic storage case, owner's manual, and (1) 30rd magazine.

Copy of FFL required for purchase.

No sales to California.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $1,019.00
In Stock
Add_to_cart
Ruger_mkiii_hunter_pistol_small
Click for Larger Image
Categories:    Ruger Handguns, New Products
Ruger MKIII Hunter Pistol - BROWN LAMINATE GRIPS - .22LR (Model 10118)

A Tradition of Excellence, Like No Other.  Ruger® Mark III™ pistols represent the evolution of Ruger .22 LR pistols, continuing the legacy created by the Ruger Standard, Mark I and Mark II pistols and yet incorporating many new engineering refinements.  They are simple, rugged, and affordable, making them a great value for any sporting purpose - whether target shooting, plinking or small game hunting.  Features include: rigid barrel/receiver connection; automatic bolt-hold-open latch; comfortable, rugged steel grip frame; contoured ejection port; easy-to-grasp tapered bolt ears; and rigidly mounted sights for consistent accuracy. Simply stated, Mark III Pistols offer the most versatility and value of any rimfire pistol on the market today.

Model: 10118
Caliber: .22 LR
Material: Stainless Steel
Finish: Satin Stainless
Rear Sight: Adjustable
Front Sight: Fiber Optic
Barrel Length: 6.88 inches
Barrel Style:
Fluted Bull Barrel
Length: 11.12 inches
Height:
5.50 inches
Width: 1.20 inches
Weight: 41 oz.
Twist:
1:16" RH
Grooves: 6
Capacity: 10 Rd
Grips: Brown Laminate

Comes complete with factory storage box, owners manual, locking device, soft storage case, weaver style scope base, (2) 10rd magazines and fired case.

Copy of FFL required for purchase.

No sales to California or Massachusetts.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $549.00
In Stock
Add_to_cart
220r-45-scpn-large_small
Click for Larger Image
Categories:    P220, New Products
Sig Sauer P220 Scorpion - .45 ACP (220R-45-SCPN)

$200 ONE TIME REBATE FROM SIG SAUER WITH THE PURCHASE OF THIS PISTOL NOW THROUGH JULY 31, 2015.  CLICK HERE FOR DETAILS.

SOMETIMES EXCELLENCE JUST ISN’T ENOUGH, While SIG SAUER® pistols are functionally flawless right out-of-the-box, some shooters can’t resist taking things up a notch.  For them, SIG SAUER offers the Scorpion series, one of their most popular models tricked out with all the features a shooter could want, from front cocking serrations to custom grips and more.

Item Number: 220R-45-SCPN
Caliber: .45 ACP
Action Type: DA/SA
Trigger Pull DA: 10.0 lbs
Trigger Pull SA: 4.4 lbs
Overall Length: 7.70 in
Overall Height: 5.50 in
Overall Width: 1.50 in
Barrel Length: 4.40 in
Sight Radius: 6.30 in
Weight w/ Mag: 30.4 oz
Mag Capacity: 8 Rounds
Sights: SIGLITE® Night Sights
Grips: Hogue G-10 Parana Grips
Frame Finish: Custom F.D.E. Finish
Slide Finish: Custom F.D.E. Finish
Accessory Rail: Yes
Features: Front Cocking Serrations

Comes complete with plastic storage case, owner's manual, locking device, and (2) 8rd magazines.

No sales to California or Massachusetts.

Copy of FFL required for purchase.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $969.00
In Stock
Add_to_cart
E26r-9-scpn-tb-large_small
Click for Larger Image
Categories:    P226, New Products
Sig Sauer P226 Scorpion - THREADED BARREL - 9mm (E26R-9-SCPN-TB)

SOMETIMES EXCELLENCE JUST ISN’T ENOUGH, While SIG SAUER pistols are functionally flawless right out-of-the-box, some shooters can’t resist taking things up a notch.  For them, SIG SAUER offers the Elite series, four of their most popular models tricked out with all the features a shooter could want, from beavertails to custom grips and more.

Item Number: E26R-9-SCPN-TB
Caliber: 9mm
Action Type: DA/SA
Trigger Pull DA: 10.0 lbs
Trigger Pull SA: 4.4 lbs
Overall Length: 8.7 in
Overall Height: 5.5 in
Overall Width: 1.6 in
Barrel Length: 4.9 in
Sight Radius: 6.3 in
Weight w/Mag: 34.0 oz
Mag Capacity: 15 Rounds
Sights: SIGLITE® Night Sights
Grips: Hogue Extreme G-10 Grips
Frame Finish: Flat Dark Earth Finish
Slide Finish: Flat Dark Earth Finish
Accessory Rail: Yes
Options: Flat Dark Earth Finish, Hogue Extreme G-10 Grips, SRT™ - Short Reset Trigger

Comes complete with plastic storage case, owners manual, locking device, thread protector, and (2) 15rd magazines.

Copy of FFL required for purchase.

No sales to California or Massachussets.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $1,059.00
In Stock
Add_to_cart
M11-a1-tb-large_small
Click for Larger Image
Categories:    M11-A1, New Products
Sig Sauer M11-A1 - THREADED BARREL - 9mm (M11-A1-TB)

TRUSTED BY ELITE MILITARY PERSONNEL.  UPGRADED FOR YOU.  PISTOL, COMPACT, 9MM, M11 Issued to US Naval Aviation and key units in every branch of the Armed Services, the M11 is proud to serve.  Upgraded with a stainless steel slide, a Short Reset Trigger and three 15 round flush fit magazines, the M11-A1 variant features the same phosphate coated internals, SIGLITE® night sights and MIL-STD UID label of the standard-issue M11.  This version features a threaded barrel (13.5x1mm LH) for thread-on silencers.

Item Number: M11-A1-TB
Caliber: 9mm
Action Type: DA/SA
Trigger Pull DA: 10.0 lbs
Trigger Pull SA: 4.4 lbs
Overall Length: 7.5 in
Overall Height: 5.4 in
Overall Width: 1.5 in
Barrel Length: 4.4 in
Sight Radius: 5.7 in
Weight w/Mag: 32.0 oz
Mag Capacity: 15 Rounds
Sights: SIGLITE® Night Sights
Grips: Black Polymer Factory Grips
Frame Finish: Black Hard Anodized
Slide Finish: Nitron®
Accessory Rail: No
Features: SRT™ - Short Reset Trigger, MIL-STD UID Label, SIG Mark Engraving, Phosphate Coated Internals, Nitron® Coated Stainless Steel Slide, Black Hard Coat Anodized Alloy Frame, SIGLITE Night Sights, Threaded Barrel (13.5x1mm LH)

Comes complete with plastic storage case, owners manual, locking device, thread protector, and (3) 15rd magazines.

Copy of FFL required for purchase.

No sales to California or Massachussets.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $929.00
In Stock
Add_to_cart
238-380-esr-large_small
Click for Larger Image
Categories:    P238, New Products
Sig Sauer P238 Rosewood ENGRAVED - .380 ACP - (238-9-ESR)

PACK LIGHT.  All-metal and under a pound, the P238® microcompact is built for the most exacting 1911 enthusiast. It offers a host of models designed to suit any shooter. This is a big gun that fits in your pocket. The ESR model features a polished Nitron® engraved slide with SIGLITE night sights, black hard coat anodized frame and rosewood grips with SIG medallion.

Item Number: 238-380-ESR
Caliber: .380 ACP (9mm short)
Action Type: SAO 
Trigger Pull SA: 8.0 lbs
Overall Length: 5.50 in
Overall Height: 3.90 in
Overall Width: 1.10 in
Barrel Length: 2.70 in
Sight Radius: 3.80 in
Weight w/out Mag: 15.20 oz
Mag Capacity: 6 Rounds
Sights: SIGLITE® Night Sights
Grips: Rosewood Grips with Sig Medallion
Frame Finish: Black Hard Anodized
Slide Finish: Polished and Engraved Nitron Slide
Accessory Rail: No
Features: Polished and Engraved Nitron Slide, SIGLITE® Night Sights

Comes complete with plastic storage case, owners manual, locking device, holster, and (1) 6rd magazine.

Copy of FFL required for purchase.

No sales to California or Massachussets.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $619.00
In Stock
Add_to_cart
Si320c9fde_small
Click for Larger Image
Categories:    P320, New Products
Sig Sauer P320 FLAT DARK EARTH - Compact - 9mm (320C-9-FDE)

The unique modular design of the P320 offers the user the ultimate in flexibility to change calibers, sizes, and fit. Small, medium, and large complete polymer grip modules ensure comfortable and optimal fit for the widest range of hand sizes. Unlike any other pistol in its class, the P320 features a unique 5-point safety system, standard on all models:

- Striker Safety
- Disconnect Safety
- 3-point Take Down Safety System
- Takedown is prohibited without removal of magazine
- System prohibits takedown without slide locked to the rear
- Rotation of takedown lever allows disassembly without tools or trigger manipulation.

Item Number: 320C-9-FDE
Caliber: 9mm
Action Type: Striker Fired DAO
Trigger Pull DA: 5.5 - 7.5 lbs
Overall Length: 7.2 in
Overall Height: 5.3 in
Overall Width: 1.4 in
Barrel Length: 3.9 in
Sight Radius: 5.8 in
Weight w/Mag: 26 oz
Mag Capacity: 15 Rounds
Sights: SIGLITE® Night Sights
Grips: Interchangeable Polymer
Frame Finish: Dark Earth Polymer
Slide Finish: Dark Earth
Accessory Rail: Yes
Features: Quick and safe take-down with no tools or trigger manipulation required, Double-Action striker fire operating system, SIGLITE® Night Sights

Comes complete with plastic storage case, owners manual, locking device, polymer holster, and (2) 15rd magazines.

Copy of FFL required for purchase.

No sales to California or Massachusetts.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $549.00
In Stock
Add_to_cart
938-9-esr-large_small
Click for Larger Image
Categories:    P938, New Products
Sig Sauer P938 Rosewood ENGRAVED - 9mm - (938-9-ESR)

With the introduction of the P938, SIG SAUER now offers the ballistic advantage of the 9mm cartridge in a platform similar in size to the best-selling P238 pistol. A single-action-only trigger, coupled with full-size SIGLITE® Night Sights makes the P938 handle like a much larger pistol, yet is still easy to carry concealed. With dimensions just slightly larger than its .380ACP counterpart, the P938 packs six plus one rounds of 9mm into an all-metal frame. The cocked-and-locked single-action trigger gives the P938 unmatched accuracy in a pistol its size. Fans of the 1911 will find the thumb safety, magazine release and slide stop lever in familiar places. An ambidextrous safety makes the P938 easy for left- and right-handed shooters.

Sig Item Number: 938-9-ESR
Caliber: 9mm 
Action Type: SAO 
Trigger Pull: SA 7.5-8.5 lbs 
Overall Length: 5.9 in 
Overall Height: 3.9 in 
Overall Width: 1.1 in 
Barrel Length: 3.0 in 
Sight Radius: 4.2 in 
Weight w/out Mag: 16.0 oz 
Mag Capacity: 6 Rounds 
Sights: SIGLITE® Night Sights 
Grips: Rosewood Grips with Sig Medallion 
Frame Finish: Black Hard Anodized 
Slide Finish: Engraved and Polished Nitron® 
Accessory Rail: No 
Features: Beavertail style frame, Rosewood Grips with Sig Medalion, Engraved and Polished Slide

Comes complete with plastic storage case, owners manual, locking device, (1) 6rd magazine, and Sig Sauer P938 polymer holster. 

Copy of FFL required for purchase.

No sales to California or Massachusetts.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $659.00
In Stock
Add_to_cart
10141_01_md_small
Click for Larger Image
Categories:    Smith & Wesson, New Products
Smith & Wesson M&P Shield - GREEN CRIMSON TRACE LASER - 9mm (SKU 10141)

Smith & Wesson’s new M&P SHIELD™ is a slim, concealable, lightweight, striker-fired polymer pistol.  The M&P SHIELD features a slim design combined with the proven and trusted features found in the M&P Pistol Series.  From the pistol’s easily concealed one-inch profile to its optimized 18-degree grip angle, the M&P SHIELD offers professional-grade features that provide consumers with simple operation and reliable performance.  The M&P SHIELD features a high-strength polymer frame with a black, durable, corrosion resistant finish, coated stainless steel slide and barrel.

SKU: 10141
Model: M&P9 SHIELD™
Caliber: 9mm
Capacity: 7 Round & 8 Round
Action: Striker Fire
Barrel Length: 3.1 inches
Front Sight: White Dot
Rear Sight: White 2-Dot
Overall Length: 6.1 inches
Frame Width: .95 inches
Overall Height: 4.6 inches
Weight: 19.0 oz
Frame Material: Polymer
Barrel/Slide Finish: Black 68 HRc
Trigger Pull: 6.5 lbs. +/-
Sight Radius: 5.3 inches

Comes complete with owners manual, factory storage box, locking device, Crimson Trace® Green Laserguard® with front activation, fired case, (1) 7rd magazine, and (1) 8rd magazine.

Copy of FFL required for purchase.

No sales to California.

FOR INFORMATION ON HOW TO ORDER FIREARMS PLEASE CLICK HERE

Our Price: each $529.00
In Stock
Add_to_cart
Micro_t-2_small
Click for Larger Image
Categories:    Aimpoint, New Products
Aimpoint Micro T-2 - 2 MOA Dot - NO MOUNT

The all new Micro T-2 redefines everything you thought you knew about compact red dot sights.  Inside the completely new sight housing are advanced optical lenses that takes optical performance to a new level.  Cutting edge lens coatings radically improve the shape and clarity of the 2 MOA red dot – especially when used with an accessory magnifier.

Unique features of the Micro T-2 are listed below.

  • Advanced optical lenses for even better light transmission
  • Front Flip-up lens cover is included
  • Transparent rear Flip-up lens cover is included
  • Reinforced protection of the turrets for even greater ruggedness
  • Ideal for rifles, carbines, shotguns, submachine guns, and handguns
  • Weight 3.7 oz. (105g) including mount, sight only 3.0 oz. (84g)
  • 1X (non-magnifying) parallax free optic
  • Compatible will all generations of Night Vision Devices (NVD)
  • 1 Off position, 4 night vision compatible settings and 8 daylight settings – one extra bright for use with laser protection glasses or in bright desert sunlight
  • Integral Picatinny-style base allows easy attachment to any rail
  • ACET technology allows 50,000 hours (over 5 years) of constant operation with one battery
  • Available in 2 MOA dot size
  • Hard anodized non-reflective finish
  • Submersible to 80 feet (25 meters)
  • Use as a standalone sight or piggybacked on larger magnifying, thermal, or night vision optics

Lightsource: LED (Light Emitting Diode) totally eye-safe
Red dot size: 2 MOA
Parallax: Absence of parallax - No centering required
Eye relief: Unlimited
Night vision compatibility: Yes
Magnification: No magnification (1X)
Battery: One 3V Lithium battery, type CR2032
Battery life in hours: 50,000 (over 5 years of continuous use)
Battery life in hours at NVD settings: 500,000
Dot intensity adjustment: Manual rotary switch
Daylight (DL) settings: 1 Off & 8 DL of which one extra bright
NVD settings: 4 NVD
Material housing: Extruded high strength aluminum
Surface finish: Hard anodized, semi-matte black
Adjustment 1 click: 13mm at 100m or 1/2” at 100yds
Temperature range: -45° - +71° C, -50° - +160° F
Water resistance - submersible to: 25m, (80ft.)
Length: 68mm / 2.7 inches
Width/height sight only: 41 x 36mm / 1.6in x 1.4in
Width/height including mount: 62 x 41mm / (2.4in x 1.6in
Weight sight only: 96g / 3.4oz
Weight sight with integrated mount: 139g / 4.9oz

Our Price: each $736.00
In Stock
Add_to_cart
Dt1023-2_small
Click for Larger Image
Categories:    New Products, Delton Uppers
Delton 16 Inch - MIDLENGTH - Basic Upper

The Delton 16 Inch - MIDLENGTH - Basic Upper features a 16 Inch CMV, manganese phosphated, M4 ramped, heavy profile barrel, chambered in 5.56 NATO with a 1:9 twist rate, midlength gas system, "F" marked A2 front sight base with sling swivel and bayonet lug and a 1/2-28 threaded muzzle.  Built on a 7075-T6 forged aluminum, annodized, M4 ramped, flattop upper receiver that is coated internally with dry film lube over the annodized surface.  The upper features a milspec bolt carrier that is  machined from 8620 steel, heat treated and plated, chrome-lined on the interior and has a gas key that is chrome-lined on the interior and attached with properly staked grade 8 fasteners.  The bolt is machined from Carpenter 158 steel, high pressure tested and MPI tested to ensure that there are no flaws in the metal.  The upper is finished out with midlength plastic handguards, a standard charging handle, and an A2 flash hider.  Delton part# DT1023

FACTORY BUILT BY DELTON INC.

Our Price: each $399.95
In Stock
Add_to_cart
Rra_lightweight_mountain_upper_small
Click for Larger Image
Categories:    RRA Uppers, New Products
Rock River Arms Lightweight Mountain Rifle Upper

The Rock River Arms Lightweight Mountain Rifle Upper features a Rock River Arms 16 inch CMV, lightweight profile barrel, chambered in 5.56 NATO with a 1:9 twist, midlength gas system and 1/2-28 threaded muzzle.  Built on a Rock River Arms forged A4 flat top upper receiver with a Rock River Arms lightweight aluminum mountain rifle handguard, Rock River proprietary, lightweight, low profile gas block, and an A2 flash hider.

Comes complete with Rock River Arms AR-15 bolt carrier group and forged charging handle.

FACTORY BUILT BY ROCK RIVER ARMS INC.

Our Price: each $699.00
In Stock
Add_to_cart
Rra_lar_300_upper_-_single_rail_gas_block_small
Click for Larger Image
Categories:    RRA Uppers (Non 5.56mm Calibers), New Products
Rock River Arms - LAR 300 - CAR A4 Upper - SINGLE RAIL GAS BLOCK - .300 Blackout

The Rock River Arms - LAR 300 - CAR A4 Upper - SINGLE RAIL GAS BLOCK features a 16 Inch CMV, HBAR barrel chambered in .300 Blackout with a 1:8 twist, carbine length gas system, and a 5/8-24 threaded muzzle.  Built on a Rock River Arms forged A4 flattop receiver with carbine length plastic handguards, clamp style single rail gas block with sling swivel and an A2 flash hider.

Complete with RRA AR-15 bolt carrier group and forged charging handle.

FACTORY BUILT BY ROCK RIVER ARMS INC.

Our Price: each $585.00
In Stock
Add_to_cart
Rock_river_arms_lar_300_basic_upper_small
Click for Larger Image
Categories:    RRA Uppers (Non 5.56mm Calibers), New Products
Rock River Arms - LAR-300 - CAR A4 Basic Upper - .300 Blackout

The Rock River Arms - LAR-300 - CAR A4 Basic Upper features a 16 Inch CMV, HBAR barrel chambered in .300 Blackout with a 1:8 twist, carbine length gas system, A2 front sight base with sling swivel and bayonet lug and a 5/8-24 threaded muzzle.  Built on a Rock River Arms forged A4 flattop receiver with carbine length plastic handguards and an A2 flash hider.

Complete with RRA AR-15 bolt carrier group and forged charging handle.

FACTORY BUILT BY ROCK RIVER ARMS INC.

 

Our Price: each $585.00
In Stock
Add_to_cart
Pmag_glock_mag_small
Click for Larger Images Blank Blank
Categories:    New Products, Handgun Magazines
Magpul PMAG 17 GL9 - Glock 17 - 9mm - 17rd Magazine

The PMAG 17 GL9 is a 17-round magazine featuring durable polymer construction, paint pen dot-matrix for labeling, tool-less floor plate removal for ease of maintenance, and a visible capacity indicator hole on the body.  The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.

Our Price: each $15.15
In Stock
Add_to_cart
Opplanet-nikon-opplanet-nikon-p-223-4-12x40-bdc-w-rapid-action-turret-8473-8473_small
Click for Larger Images Blank
Categories:    Nikon Optics, New Products
Nikon P-223 - 4-12x40mm - BDC 600 Reticle - Matte Black Riflescope

The P-223 4-12x40mm riflescope has all the essential features that long-range shooters demand.  With Nikon’s BDC 600 reticle, rapid action turrets and quick focus eyepiece, reaching out to the most distant targets is easier than ever before.

P-Series Riflescope Features:

Fully Multicoated Optical System for Maximum Brightness
Spring-Loaded Instant Zero-Reset Turrets
Generous, consistent eye relief
Waterproof, Fogproof
100-yd. Parallax Setting
Up to 98% light transmission
Precise, 1/4-inch @ 100 yd. Adjustments
Compatible with Spot On Custom Turrets

Manufacturer Part #: 8473
Magnification: 4-12x
Objective Diameter: 40mm
Exit Pupil: 3.3-10.0mm
Field of View: 7.3-23.6 ft @ 100 yds
Tube Diameter: 1 in
Eye Relief: 3.7in
Eyepiece Outside Diameter: 44mm
Weight: 17.5 oz
Overall Length: 14.1 in
Adjustment Graduation: 1/4 in
Max Internal Adjustment: 60 MOA
Parallax Setting: 100 yds
Waterproof/Fogproof: Yes
Matte Finish: Yes
Use: AR (Modern Sporting Rifle)
Reticle: BDC 600

Our Price: each $249.95
In Stock
Add_to_cart
Opplanet-nikon-p-308-4-12x40-matte-bdc800-riflescope-16328-main_small
Click for Larger Image
Categories:    Nikon Optics, New Products
Nikon P-308 - 4-12x40mm - BDC 800 Reticle - Matte Black Riflescope

The P-308 riflescope provides shooters with everything they need to hit their target, including a 4-12 magnification, a 40mm objective, fully multicoated lenses to ensure a clear view, and Nikon’s popular BDC 800 reticle – a reticle specifically engineered for the .308 Winchester / 7.62x51mm NATO round with 168-grain HBT Match bullet at 2,680 fps. The P-308 is also fitted with exposed, spring-loaded Instant Zero-Reset Turrets with easy-grip course knurling, which make in-field adjustments easier by allowing shooters to reset their turrets back to zero after sighting-in.  This new riflescope offering is waterproof, fogproof and shockproof.  The P-308 is also optimized for use with Spot On™ Ballistic Match Technology.  The Spot On program provides users with the exact aiming points on any BDC reticle for any load or ammunition at a specific range.

P-Series Riflescope Features:

Fully Multicoated Optical System for Maximum Brightness
Spring-Loaded Instant Zero-Reset Turrets
Generous, consistent eye relief
Waterproof, Fogproof
100-yd. Parallax Setting
Up to 98% light transmission
Precise, 1/4-inch @ 100 yd. Adjustments
Compatible with Spot On Custom Turrets

Manufacturer Part #: 16328
Magnification: 4-12x
Objective Diameter: 40mm
Exit Pupil: 3.3-10.0mm
Field of View: 11.3-33.8 ft @ 100 yds
Tube Diameter: 1 in
Eye Relief: 4.0in
Eyepiece Outside Diameter: 44mm
Weight: 17.2 oz
Overall Length: 14.1 in
Adjustment Graduation: 1/4 in
Parallax Setting: 100 yds
Waterproof/Fogproof: Yes
Matte Finish: Yes
Use: Centerfire Short/Mid Range & AR (Modern Sporting Rifle)
Reticle: BDC 800

Our Price: each $249.95
In Stock
Add_to_cart
Opplanet-nikon-prostaff-3-9x40mm-riflescope-6722_small
Click for Larger Image
Categories:    Nikon Optics, New Products
Nikon Prostaff - 3-9x40mm - BDC Reticle - Matte Black Riflescope

The Nikon BDC reticle allows hunters to hold 'dead-on' at ranges exceeding those previously thought possible.  The BDC's unique see-through ballistic circles offer an incredible advantage for long range shooting, yet allow a normal sight picture for shorter-range shots where the crosshair itself is the aiming point.

Manufacturer Part #: 6722
Magnification: 3-9x
Objective Diameter: 40mm
Exit Pupil: 4.4-13.3mm
Field of View: 11.3-33.8 ft @ 100 yds
Tube Diameter: 1 in
Eye Relief: 3.6in
Eyepiece Outside Diameter: 44mm
Objective Outside Diameter: 50mm
Overall Length: 12.4 in
Adjustment Graduation: 1/4 in
Parallax Setting: 100 yds
Waterproof/Fogproof: Yes
Matte Finish: Yes
Reticle: BDC

Our Price: each $179.95
In Stock
Add_to_cart
011_nvprod1-11_small
Click for Larger Image
Categories:    Charging Handles, New Products
Noveske - RAPTOR - Ambi Charging Handle - 5.56 NATO

The Raptor is truly revolutionary in design & function.  From rapid palm "blading" or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side.  The Raptor charging handle is manufactured from 7075-T6 aluminum and is hard coat annodized.

MAY NOT FIT SOME SIG SAUER AR-15 RIFLES, ESPECIALLY THE SIG 516 RIFLES.

Our Price: each $89.95
In Stock
Add_to_cart
Blk-nitride-bcg_small
Click for Larger Image
Categories:    Bolt Assemblies, New Products
Noveske Marked M16 RCA Black Nitride Bolt Carrier Group

This M16 bolt carrier group is marked with the Noveske logo and has a black nitride finish. The carrier features 8620 steel with 9310 bolt and tool steel extractor and cam pin.  Much more than typical parkerizing, phosphating or black oxide, Blacknitriding? is a thermal chemical diffusion of nitrogen and carbon into the surface of the steel.  This process increases wear-resistance, fatigue strength, corrosion resistance, lubricity and cosmetic appeal.

Our Price: each $195.00
In Stock
Add_to_cart
Noveske_td_and_pivot_pins_small
Click for Larger Image
Categories:    Lower Receiver Accessories, New Products
Noveske Marked Takedown/Pivot Pin Set
These steel pins which are nitride finished are a direct replacement for the factory rear takedown and front pivot pin on your AR-15.  They are an easy way to freshen up the look of your rifle.  These pins are manufactured from 4140 hardened steel, designed to work with any mil-spec lower, and have the Noveske logo machined into the head.
Our Price: each $15.95
In Stock
Add_to_cart
Noveske_marked_troy_battlesights_small
Click for Larger Image
Categories:    Front Sights, Rear Sights, New Products
Noveske Marked - Troy Industries Front and Rear Backup Iron Sight Set

These backup iron sights are manufactured by Troy Industries for Noveske and have the Noveske Iron Cross engraved on them.  The Rear Sight has a dual peep, same plane aperture which allows for perfect co-witness of red dot and holographic optics.  Full Windage adjustment knob located in same position as standard M16A2, A3, A4 weapons.  Each click equals .25 MOA (M16A4 rifle) and .33 MOA (M4 carbine) shift in impact.  A stainless steel cross-lock provides 1000 pounds of shear strength.  Sight works in conjunction with all standard height front sights.  The cross-lock guarantees return to zero, eliminates all wobble and the possibility of accidental folding.  A release button is depressed to fold.  Low profile snag resistant design.  Precision machined Aircraft T6 Aluminum Billet and Stainless Steel Construction.  The front sight contains an A2 style front sight post and is designed to mount on a quad rail.

Our Price: each $199.95
In Stock
Add_to_cart
Sts_fixed_small
Click for Larger Image
Categories:    Lower Receiver Accessories, New Products
Noveske STS (Short Throw Selector) 60 Degree Selector - Right Hand

--60 Degree Throw  
--Tuned for standard actuation force from safe & smooth return from fire  
--Machined stainless construction with nitride finish  

Included:  
--Included Right Hand selector drum  
--1 Screw 
--A short & a long Magpul SSG Lever  
for operator preference

Our Price: each $37.95
In Stock
Add_to_cart
Ambi_small
Click for Larger Image
Categories:    Lower Receiver Accessories, New Products
Noveske STS (Short Throw Selector) 60 Degree Selector - Ambi

--60 Degree Throw 
--Tuned for standard actuation force from safe & smooth return from fire 
--Machined stainless construction with nitride finish 

Included: 
--Included Ambi selector drum 
--2 Screws 
--A short & a long Magpul SSG Lever 
for operator preference

Our Price: each $39.95
In Stock
Add_to_cart
Surefire_socom_flash_hider_1-2x28_small
Click for Larger Image
Categories:    Flash Hiders, New Products
Surefire SF3P-556-1/2-28 - 3 Prong SOCOM Flash Hider/Suppressor Adapter

The advanced SureFire SF3P-556-1/2-28 three-prong flash hider, which fits M4/M16 weapons and variants with 1/2x28 muzzle threads, features a patent-pending design that greatly reduces muzzle flash—typically greater than 99%—when compared with a plain muzzle.  Boasting robust tines built to withstand the rigors of combat, the SF3P-556-1/2-28 also serves as a rock-solid mounting adapter for SureFire SOCOM Series 5.56 mm Fast-Attach® suppressors.  Precision machined from US mill-certified heat-treated stainless steel bar stock—and including high-precision single-point cut threads for optimum thread interface—the SF3P-556-1/2-28 flash hider is given a black Ionbond DLC coating to provide maximum protection under harsh environmental conditions and to facilitate cleaning, even after extreme use.   When used in conjunction with a SureFire SOCOM Series suppressor, the patent-pending design of the SF3P-556-1/2-28 provides multiple bearing surfaces to ensure superior suppressor alignment and to prevent the audible ringing of tines inside the suppressor.  A rear labyrinth seal minimizes potential carbon buildup in the indexing system and facilitates suppressor removal after extended firing.

  • Patent-pending design provides greater than a 99% reduction in flash, when compared to a plain muzzle
  • Multiple bearing surfaces provide superior suppressor alignment and prevent ringing of tines inside suppressor
  • Precision machined from US mill-certified heat-treated stainless steel bar stock
  • High-precision single-point cut barrel threads create optimum thread interface
  • Inspected for all critical dimensions including concentricity and alignment
  • Black Ionbond DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use
  • Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors
  • Labyrinth seals mitigate gas leak from suppressor lock ring
  • Installation requires no permanent modifications for M4 / M16 / AR15 type weapons
Our Price: each $129.00
In Stock
Add_to_cart
Surefire_socom_muzzle_brake_1-2x28_small
Click for Larger Image
Categories:    Brakes / Compensators, New Products
Surefire SFMB-556-1/2-28 - SOCOM Muzzle Brake/Supressor Adapter

The advanced SureFire SFMB-556-1/2-28 muzzle brake, which fits M4 / M16 weapons and variants with 1/2-28 muzzle threads, greatly reduces both recoil impulse and muzzle rise so that the weapon tracks straight back to keep you on target for faster shot-to-shot recovery.  Its patented Impulse Diffusion design minimizes side blast and rear-directed concussion effects.  The SFMB-556-1/2-28 also serves as a rock-solid mounting adapter for SureFire SOCOM Series 5.56 mm Fast-Attach® suppressors.  Precision machined from US mill-certified heat-treated stainless steel bar stock—including high-precision single-point cut threads for optimum thread interface—the SFMB-556-1/2-28 muzzle brake is given a black Ionbond DLC coating to provide maximum protection under harsh environmental conditions and to facilitate cleaning even after extreme use.  When used in conjunction with a SOCOM Series suppressor, the patent-pending design of the SFMB-556-1/2-28 provides multiple bearing surfaces to ensure superior suppressor alignment. A rear labyrinth seal minimizes potential carbon buildup in the indexing system and facilitates suppressor removal after extended firing.

All SureFire SOCOM Series muzzle brakes have blind pilot holes at the 3 and 9 o’clock position to enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. They also have blind pilot holes at the 6 o’clock position to enable indexing the adapter at bottom dead center, and to pin-and-weld on short-barreled rifles.  All that is required is a basic hand drill and appropriate drill bits.

  • Offset porting delivers greatly reduced recoil impulse and muzzle rise, so the weapon tracks straight back to keep you on target for faster shot-to-shot recovery
  • Multiple bearing surfaces for superior suppressor alignment
  • Precision machined from US mill-certified heat-treated stainless steel bar stock
  • High-precision single-point cut barrel threads for optimum thread interface
  • Inspected for all critical dimensions including concentricity and alignment
  • Pilot holes for tuning of muzzle brake and to pin-and-weld on short-barreled rifles
  • Black Ionbond DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use
  • Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors
  • Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system
  • Installation requires no permanent modifications for M4 / M16 / AR15 type weapons
Our Price: each $149.00
In Stock
Add_to_cart
Surefire_socom_muzzle_brake_5-8x24_small
Click for Larger Image
Categories:    Brakes / Compensators, New Products
Surefire SFMB-762-1/2-28 - SOCOM Muzzle Brake/Supressor Adapter

The advanced SureFire SFMB-762-5/8-24 muzzle brake, which fits the Armalite AR-10, DPMS LR308, and 7.62 mm rifles with 5/8-24 muzzle threads, greatly reduces both recoil impulse and muzzle rise and features neutral porting that loads bi-pod legs evenly.  Its patented Impulse Diffusion design minimizes side blast and rear-directed concussion effects.  The SFMB-762-5/8-24 also serves as a rock-solid mounting adapter for SureFire SOCOM Series 7.62 mm Fast-Attach® suppressors.  Precision machined from US mill-certified heat-treated stainless steel bar stock—including high-precision single-point cut threads for optimum thread interface—the SFMB-762-5/8-24 muzzle brake is given a black Ionbond DLC coating to provide maximum protection under harsh environmental conditions and to facilitate cleaning even after extreme use.  When used in conjunction with a SOCOM Series suppressor, the patent-pending design of the SFMB-762-5/8-24 provides multiple bearing surfaces to ensure superior suppressor alignment. A rear labyrinth seal minimizes potential carbon buildup in the indexing system and facilitates suppressor removal after extended firing.

All SureFire SOCOM Series muzzle brakes have blind pilot holes at the 3 and 9 o’clock position to enable fine-tuning of recoil characteristics for individual shooting styles or ammunition characteristics. They also have blind pilot holes at the 6 o’clock position to enable indexing the adapter at bottom dead center, and to pin-and-weld on short-barreled rifles. All that is required is a basic hand drill and appropriate drill bits.

  • Delivers greatly reduced recoil impulse and muzzle rise, and features neutral porting that loads bi-pod legs evenly.
  • Multiple bearing surfaces for superior suppressor alignment
  • Precision machined from US mill-certified heat-treated stainless steel bar stock
  • High-precision single-point cut barrel threads for optimum thread interface
  • Inspected for all critical dimensions including concentricity and alignment
  • Pilot holes for tuning of muzzle brake and to pin-and-weld on short-barreled rifles
  • Black Ionbond DLC coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use
  • Serves as rock-solid mounting adapter for SureFire SOCOM Series sound suppressors
  • Labyrinth seals prevent carbon buildup on suppressor lock ring indexing system
  • Installation requires no permanent modifications for Armalite AR-10 and DPMS LR308 rifles
Our Price: each $149.00
In Stock
Add_to_cart
Tangodown_keymod_vertical_grip_-_black_small
Click for Larger Image
Categories:    Vertical Grips & Rails, New Products
TangoDown BGV-KM1 Keymod Vertical Grip - BLACK

Developed specifically for all KEYMOD handguards, the BGV-KM1 Vertical Grip is the perfect fore grip for your lightweight rifle or carbine.  Its short grip length is ideal for CQC, and featherweight injection molded shape is comfortable to the hand, hour after hour.  The BGV-KM1 takes full advantage of all the KEYMOD design features, such as strength, light weight and simplicity.  The BGV-MK1 features a rugged, cast stainless steel KEYMOD interface anchor that securely mounts to any KEYMOD weapon handguard.  Just loosen the Allen head fastener inside the grip housing, locate and slide the grip into your desired KEYMOD address and tighten.  The KEYMOD anchor, combined with the premium impact and heat modified polymer, guarantees this grip will survive any abuse you can give it.

Our Price: each $26.55
In Stock
Add_to_cart

Product Index

     find us on facebook

PK Firearms • Shelbyville, IL 62565 • Phone: (217) 774-5810Fax: (217) 774-5814 • Email: Sales

Please refer to the FAQ section of our website before calling or emailing with a question.

SHIPPING RATES

Powered By SDS SiteManager